Modern Tapered Aluminium Flagpoles

These flagpoles are made on one of only three spinning lathes in Australia.  There are two of these in Sydney and one in Adelaide. We draw ours from Adda Flagpoles in Sydney, arguably Australia’s market leader, and supply and install when required.

The aluminium tube used is extruded from 6000 series aluminium with a T6 temper which is a high strength marine grade alloy with excellent durability particularly suitable for architectural items.

All these poles are fitted with a truck (knob on top) pulley, halyard, flag clips and base plate or wall brackets .  They are also available with a vandal resistant halyard (locked away inside the pole) hinged base or tabernacle. Rated Wind Terrain Category 2

These poles are easy to install, are supplied with hold down bolts and spacing template for the foundation.  They come in various finishes, satin aluminium, anodised, or powder coated, and  although white is by far the most popular and durable finish, other colours are available.

6 - 7.5 metre poles

6 Metre Flagpole

Designed for the domestic and commercial market,  this pole is easy to install with a foundation concrete block 450 x 450 x 450mm and the template used to cast in the hold down bolts.  Tube size  80mm dia at the base, tapered to 40mm at the top.  Packed size  600 x 28 x 28cm, and 35kg dead weight.  Recommended flag size 2-yd (1830 x 915mm).

7.5 Metre Flagpole

Designed for the domestic and commercial market, this pole is also easy to install using a 450 x 450 x 550mm foundation and hold down bolts cast in using the template supplied.  Tube size 80mm dia tapered to 40mm at the top.  For freight cost allow 750 x 28 x 28cm and 38kg dead weight.  If a  yardarm is required, dimensions are the same for cubic weight, and dead weight  48kg. Recommended flag size 2.5yd (2280 x 1140mm) on single pole, or three 2-yd flags if there is a yardarm.  Note that this is the smallest pole for a yardarm allowing the top flag to fly free of the yardarm, and the flags on the yardarm to be out of reach from the ground.

9 Metre Flagpole

Designed for the industrial and commercial market, this pole is easy to install by two men using a 450 x 450 x 600mm concrete block, hold down bolts cast in using the template supplied.  Can have a hinged base or tabernacle  base, dresses well with a yardarm and/or gaff arm.  Tube size 100mm dia tapering to 60mm at the top, measures  900 x 28 x 28cm packed, weighing 45kg, or 55kg with a yardarm or 63kg with a gaff arm.  Recommended flag size for stand-alone pole 3yd (2740 x 1370mm) or three 2.5yd flags if flying on a yardarm or gaff.

9 Metre Flagpoles

12 Metre Flagpole

Designed for larger commercial, industrial and sporting locations, these poles can be installed by three men or a small crane,  with a foundation 650 x 650 x 900mm of 25mpa concrete.  They are machine tapered out of 127mm dia tube tapered to 80mm dia at the top.  A hinged base or tabernacle is  recommended.  Flag size 4yd (3660 x 1830mm) is usual.

12 Metre Flagpoles

Flying flags larger than those recommended

Flags of All Nations sells flagpoles which withstand quite heavy wind gusts, and many of our customers fly flags larger than those recommended here and assume responsibility for doing so. It must be born in mind that in a storm, for example, the flag will be full of water and the wind will be gusting heavily, imposing unusual stresses on the flagpole.  The greatest stress will be on the flag,  which should not be flown in excessively windy weather.